We use cookies to enhance your browsing experience, provide personalized content and analyze our traffic. By clicking "Accept", you agree to our use of all cookies.
For any questions about our services you can call us at: +86-188-7042-1176
Views: 0 Author: Site Editor Publish Time: 2025-08-25 Origin: Site
Have you ever used an eraser to scrub away a mistake on paper? Or maybe scrubbed a dirty pan with a rough sponge?
For huge jobs like cleaning grungy metal, old engines, or giant bridges, grown-ups use a super powerful cleaning tool. It’s even cooler than it sounds! We call this process blasting!
Instead of sponges, they use special materials called blasting media. Think of it like a super-powered sandblaster that shoots tiny particles to clean surfaces super well. Let's blast through this topic together!
Imagine you have a super-powered water gun. But instead of water, you fill it with tiny, gritty particles.
When you shoot this stream at a dirty surface, it scrubs away all the grime, rust, or old paint. This process is what we call blasting.
We call the tiny particles that get shot out of the blaster the media. There are many abrasive blasting media types, just like there are different kinds of sandpaper.
You pick the one that’s perfect for the job so you don’t hurt the thing you’re cleaning.
The Different Types of Blasting "Super Scrubbies"
1. Aluminum Oxide: The Super-Scratchy Superhero
Aluminum oxide blast media is like the super tough sandpaper of the blasting world. It’s made from an extra-hard material, and its particles are super sharp and jagged.
Think of it like crushed diamonds—but way cheaper!
This is the stuff you use for really tough jobs. It can strip thick, old paint off steel or clean a rusty bike frame like a pro.
And the coolest part? It’s so strong that it can be used over and over again!
2. Soda Blasting: The Gentle Giant
Soda blasting media is probably the coolest one. It’s actually made from baking soda!
Yes, the same stuff your parents use in baking and to freshen up the fridge.
Because it’s so soft, it’s perfect for cleaning delicate things that could be scratched by rougher materials. It’s great for cleaning up soot after a fire or cleaning an old, valuable coin without damaging it.
When you’re done, you can just wash it away with water!
3. Glass Beads: For a Smooth and Shiny Finish
Glass blasting media is made from tiny glass beads. Think of them as super tiny, super hard marbles!
When you shoot these beads at metal, they don’t scratch it deeply. Instead, they polish the surface, making it really smooth and shiny—almost like brushing it really well!
It’s perfect for cleaning metal molds used to make plastic toys. It also works great for making engine parts look like new again!
4. Plastic Media: The Paint Stripper
Plastic media blasting uses tiny bits of plastic. It’s the go-to choice for stripping paint off delicate things!
Imagine you need to remove paint from an old metal toy car without scratching the metal. Plastic media is perfect for that!
It’s also used on airplanes to carefully remove old paint without harming the delicate aluminum body.
5. Steel Blasting: For the Toughest Jobs
Steel blasting media is exactly what it sounds like: tiny pieces of steel!
This is the heaviest-duty scrubbing material you can use. It’s made for jobs on things that are already super tough—like the steel beams that build skyscrapers or huge ships.
It’s powerful enough to blast off the thickest rust and toughest paint you can imagine. Think of it like using a power washer on a dirty driveway… but a million times stronger!
How Do You Clean Something Soft Like Aluminum?
This is a great question! Blasting media for aluminum has to be chosen very carefully. Aluminum is a relatively soft metal (like using a soda can for a school project). If you used the super tough steel media on it, you would damage it badly.
So, what do they use?
Glass beads are a great choice because they clean and polish without digging in too much.
Plastic media is also fantastic because it can strip paint without hurting the soft aluminum underneath.
Walnut shells! Sometimes they even use crushed walnut shells. They are hard enough to clean but soft enough to be safe.
The most important rule: you must never use a media on aluminum that has ever been used on steel first. Even tiny leftover steel particles can get stuck in the aluminum and cause it to rust! Yuck.
Request A Quote For Your Project!
ㆍFill in your requirements and upload your 2D&3D file, we will feedback your project quotation and DFM within 24 hours.
ㆍFile types: STEP, STP, IGES, IGS, SLDPRT, 3DM, SAT or X_T files File size: < 128 MB Part size: < 1500*1500*1500 mm ㆍPrivacy: We respect your privacy. Here you can find an example of a non-disclosure agreement. By submitting this form, you agree to our terms & conditions and privacy policy.
